--- title: "Drive-In Rack in Edgewood, NM | Free Layout" url: https://albuquerquepalletrack.com/service-area/edgewood/drive-in-rack description: "Drive-In Rack in Edgewood, NM. Layout planning, equipment selection and installation. Get a free quote." lang: en --- Image: Drive-In Rack system inside a New Mexico warehouse (https://albuquerquepalletrack.com/assets/drive-in-hero-CA5gVqly.jpg) Edgewood, New Mexico # Drive-In Rack in Edgewood, NM Edgewood operations managing deliveries that need indoor staging when mountain weather changes cannot afford bulk stock occupying more aisles than its SKU count needs. Around the I-40 East Mountain corridor and historic Route 66 frontage, the immediate problem is often where the next receipt will go without closing a shipping lane. Drive-In Rack can address that pressure when support rails hold pallets in deep lanes entered by the forklift. We start with the loads and the building, not a predetermined rack package. For an East Mountain supply building, we check forklift dimensions, pallet support, and lane clearances and plan around reserving a protected unloading zone before filling the floor. Your free design consultation compares the storage or move plan with your daily work. Send the floor dimensions and load information for your Edgewood, NM facility; you receive a layout and itemized scope before equipment is ordered or moved. (505) 436-7469 ## Why Edgewood Warehouses Work With Us A Edgewood project needs a plan that respects the I-40 East Mountain corridor and historic Route 66 frontage, not simply a drawing with a different town printed on it. Access from I-40 and NM-344 affects how deliveries reach your dock, while the space inside the building decides where people, trucks, and inventory can safely work. We discuss those constraints before assigning drive-in rack to a storage zone. For building-material supply and regional distribution, the useful starting point is the material itself: bulk packaged materials and repeat-SKU reserve stock. We review forklift dimensions, pallet support, and lane clearances, then show how one-ended last-in, first-out storage or two-ended drive-through access would change the daily operation. If the system does not fit the inventory profile, we compare an alternative rather than force the building into a poor arrangement. Albuquerque Pallet Rack, a division of Warehouse Equipment & Supplies Co., gives your Edgewood team a clear path from design consultation to a priced scope. You can review equipment, installation, delivery coordination, and any scope questions together. That makes it easier to decide what to retain, what to replace, and what to stage first while reserving a protected unloading zone before filling the floor. Free warehouse consultation CAD layout with position counts Installation by trusted installation partners Image: Drive-in pallet rack lanes fitted with continuous rails (https://albuquerquepalletrack.com/assets/drive-in-pallet-rack-Cg418ibV.jpg) Image: Drive-in warehouse racking loaded with bulk pallets (https://albuquerquepalletrack.com/assets/drive-in-hero-CA5gVqly.jpg) ### Operations We Rack Around Here Service areas around this city include I-40 East Mountain corridor, Route 66 industrial frontage, Venus Road. Distribution and freight Building materials Specialty manufacturing Regional supply ## How Drive-In Rack Works in Edgewood No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. 1 ### Continuous rails, not beams Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation. 2 ### The truck enters the lane The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one. 3 ### One open end or two One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides. 4 ### Guarding built into the design Guide rails, column guards, and rail-end protection are part of the spec from the start, to separate lift-truck travel from the rack structure. ## What a Edgewood Drive-In Rack Project Includes Your drive-in rack project in Edgewood starts with a working inventory and building review. We collect dimensions, load weights, handling-equipment details, and the receiving and shipping pattern. For an East Mountain supply building, that includes reserving a protected unloading zone before filling the floor. Photos and a floor plan let us flag unanswered questions before the drawing becomes a purchase decision. We check truck width, mast clearance, and load overhang together before drawing a lane. Guide rails and upright protection belong in the initial scope. Where inventory variety is high, keeping selective rows alongside deep reserve storage often gives a better working layout. Next, the CAD plan shows storage locations, operating aisles, staging areas, and clearances. We review one-ended last-in, first-out storage or two-ended drive-through access against the inventory that moves along I-40 and NM-344. The itemized quote separates equipment, accessories, labor, and agreed coordination work so your Edgewood operations lead can see exactly what is included. Existing components are assessed for identification, damage, compatibility, and documented capacity rather than assumed suitable. Before installation or relocation, the scope establishes delivery access, exclusion zones, installation sequence, and the checks required at handover. Our team handles the permit side for you. The completed work is checked against the agreed drawing, with capacity documentation and operating limits provided for the configured system. Your team can then load and use the installation within those limits, with a clear record for future changes. High volume of a small number of SKUs Seasonal or buffer inventory held in bulk Cold storage and freezer rooms where cube matters most Product too fragile to floor-stack more than two high Buildings where floor space, not height, is the binding constraint Call (505) 436-7469: (505) 436-7469 ## Get a Drive-In Rack Quote for Your Edgewood Warehouse Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (505) 436-7469. ### Albuquerque Pallet Rack 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 (505) 436-7469 Monday - Friday: 8:00 AM - 6:00 PM ## Design Questions for Drive-In Rack in Edgewood - What forklift will enter the lanes, and what are its exact dimensions? - How many pallets do you hold per SKU? - Do you need LIFO, or does the product require drive-through FIFO? - What's the clear height and floor condition in the storage area? - How many total pallet positions are you trying to reach? ## Drive-In Rack Questions We Hear Most ### What determines the price of pallet rack? ### Do you install pallet rack? ### Which pallet rack system fits my inventory? ### What aisle width do I need? ### How are pallet rack load capacities determined? ## Other Rack Types We Supply in Edgewood ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://albuquerquepalletrack.com/service-area/edgewood ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://albuquerquepalletrack.com/service-area/edgewood/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://albuquerquepalletrack.com/service-area/edgewood/pallet-flow-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://albuquerquepalletrack.com/service-area/edgewood/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://albuquerquepalletrack.com/service-area/edgewood/carton-flow-rack ### Warehouse Relocation Move the storage system with a labeled teardown, destination layout, and phased reinstallation plan. View details https://albuquerquepalletrack.com/service-area/edgewood/warehouse-relocation ## Nearby Areas We Also Serve Our delivery and installation territory covers the Albuquerque metro and greater New Mexico, so one team can handle multiple buildings for the same company. Drive-In Rack in Albuquerque: https://albuquerquepalletrack.com/service-area/albuquerque/drive-in-rack Drive-In Rack in Rio Rancho: https://albuquerquepalletrack.com/service-area/rio-rancho/drive-in-rack Drive-In Rack in Bernalillo: https://albuquerquepalletrack.com/service-area/bernalillo/drive-in-rack Drive-In Rack in Corrales: https://albuquerquepalletrack.com/service-area/corrales/drive-in-rack Drive-In Rack in Los Lunas: https://albuquerquepalletrack.com/service-area/los-lunas/drive-in-rack Drive-In Rack in Belen: https://albuquerquepalletrack.com/service-area/belen/drive-in-rack View All Service Areas: https://albuquerquepalletrack.com/service-area ## Where We Work Located in Albuquerque, we serve the entire metro and greater New Mexico with industrial pallet racks and warehouse storage solutions. ### Albuquerque Pallet Rack #### Address 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 #### Phone (505) 436-7469 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Drive-In Rack in Edgewood? Call (505) 436-7469 or request a quote and we will get a layout started. (505) 436-7469 Tap to Call: (505) 436-7469 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://albuquerquepalletrack.com/#business", "name": "Albuquerque Pallet Rack", "url": "https://albuquerquepalletrack.com", "telephone": "(505) 436-7469", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "2105 Vista Oeste NW, Suite E #3491", "addressLocality": "Albuquerque", "addressRegion": "NM", "postalCode": "87120", "addressCountry": "US" }, "hasMap": "https://www.google.com/maps?q=Albuquerque+Pallet+Rack,+2105+Vista+Oeste+NW,+Albuquerque,+NM+87120&output=embed", "areaServed": [ { "@type": "City", "name": "Albuquerque", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Rio Rancho", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Bernalillo", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Corrales", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Los Lunas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Belen", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Santa Fe", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Edgewood", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Moriarty", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Placitas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Tijeras", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Grants", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Socorro", "containedInPlace": { "@type": "State", "name": "New Mexico" } } ] }, { "@type": "Service", "@id": "https://albuquerquepalletrack.com/service-area/edgewood/drive-in-rack#service", "name": "Drive-In Rack in Edgewood, NM", "serviceType": "Drive-In Rack", "url": "https://albuquerquepalletrack.com/service-area/edgewood/drive-in-rack", "description": "No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.", "provider": { "@id": "https://albuquerquepalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Edgewood", "containedInPlace": { "@type": "State", "name": "New Mexico" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://albuquerquepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://albuquerquepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Edgewood", "item": "https://albuquerquepalletrack.com/service-area/edgewood" }, { "@type": "ListItem", "position": 4, "name": "Drive-In Rack", "item": "https://albuquerquepalletrack.com/service-area/edgewood/drive-in-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What determines the price of pallet rack?", "acceptedAnswer": { "@type": "Answer", "text": "Price depends on pallet positions, height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and itemized quote. We supply new material only." } }, { "@type": "Question", "name": "Do you install pallet rack?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The rack is installed to the agreed layout, anchored to the floor and checked before loading." } }, { "@type": "Question", "name": "Which pallet rack system fits my inventory?", "acceptedAnswer": { "@type": "Answer", "text": "Selective teardrop rack is the starting point for mixed SKUs; pushback stores two to six pallets deep with LIFO by SKU, pallet flow suits FIFO or dated stock, and drive-in suits bulk inventory with few SKUs. Cantilever handles long loads, while carton flow serves case picking. We compare the options against your inventory and handling equipment." } }, { "@type": "Question", "name": "What aisle width do I need?", "acceptedAnswer": { "@type": "Answer", "text": "Your lift truck sets the working aisle: counterbalance trucks generally need about 12–13 ft, reach trucks about 8–10 ft, and very-narrow-aisle trucks about 5–6 ft. Confirm the actual truck and load dimensions; aisle width drives storage density more than almost any other layout choice." } }, { "@type": "Question", "name": "How are pallet rack load capacities determined?", "acceptedAnswer": { "@type": "Answer", "text": "There is no single capacity for pallet rack: beam capacity is per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet, and the configured capacities go on load plaques." } } ] } ] ```