--- title: "Drive-In Rack in Bernalillo, NM | Free Layout" url: https://albuquerquepalletrack.com/service-area/bernalillo/drive-in-rack description: "Drive-In Rack in Bernalillo, NM. Layout planning, equipment selection and installation. Get a free quote." lang: en --- Image: Drive-In Rack system inside a New Mexico warehouse (https://albuquerquepalletrack.com/assets/drive-in-hero-CA5gVqly.jpg) Bernalillo, New Mexico # Drive-In Rack in Bernalillo, NM Bernalillo operations managing building-material deliveries staging for routes north and west cannot afford bulk stock occupying more aisles than its SKU count needs. Around the US-550 and I-25 interchange, the immediate problem is often where the next receipt will go without closing a shipping lane. Drive-In Rack can address that pressure when support rails hold pallets in deep lanes entered by the forklift. We start with the loads and the building, not a predetermined rack package. For a supply warehouse near US-550, we check forklift dimensions, pallet support, and lane clearances and plan around preserving room for outbound loads before the next delivery. Your free design consultation compares the storage or move plan with your daily work. Send the floor dimensions and load information for your Bernalillo, NM facility; you receive a layout and itemized scope before equipment is ordered or moved. (505) 436-7469 ## Why Bernalillo Warehouses Work With Us A Bernalillo project needs a plan that respects the US-550 and I-25 interchange, not simply a drawing with a different town printed on it. Access from US-550 and I-25 affects how deliveries reach your dock, while the space inside the building decides where people, trucks, and inventory can safely work. We discuss those constraints before assigning drive-in rack to a storage zone. For construction supply and regional distribution, the useful starting point is the material itself: bulk packaged materials and repeat-SKU reserve stock. We review forklift dimensions, pallet support, and lane clearances, then show how one-ended last-in, first-out storage or two-ended drive-through access would change the daily operation. If the system does not fit the inventory profile, we compare an alternative rather than force the building into a poor arrangement. Albuquerque Pallet Rack, a division of Warehouse Equipment & Supplies Co., gives your Bernalillo team a clear path from design consultation to a priced scope. You can review equipment, installation, delivery coordination, and any scope questions together. That makes it easier to decide what to retain, what to replace, and what to stage first while preserving room for outbound loads before the next delivery. Free warehouse consultation CAD layout with position counts Installation by trusted installation partners Image: Drive-in pallet rack lanes fitted with continuous rails (https://albuquerquepalletrack.com/assets/drive-in-pallet-rack-Cg418ibV.jpg) Image: Drive-in warehouse racking loaded with bulk pallets (https://albuquerquepalletrack.com/assets/drive-in-hero-CA5gVqly.jpg) ### Operations We Rack Around Here Service areas around this city include US 550 corridor, I-25 North, Sandoval County industrial parks. Construction supply Building materials Regional distribution Light manufacturing ## How Drive-In Rack Works in Bernalillo No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. 1 ### Continuous rails, not beams Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation. 2 ### The truck enters the lane The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one. 3 ### One open end or two One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides. 4 ### Guarding built into the design Guide rails, column guards, and rail-end protection are part of the spec from the start, to separate lift-truck travel from the rack structure. ## What a Bernalillo Drive-In Rack Project Includes Your drive-in rack project in Bernalillo starts with a working inventory and building review. We collect dimensions, load weights, handling-equipment details, and the receiving and shipping pattern. For a supply warehouse near US-550, that includes preserving room for outbound loads before the next delivery. Photos and a floor plan let us flag unanswered questions before the drawing becomes a purchase decision. We check truck width, mast clearance, and load overhang together before drawing a lane. Guide rails and upright protection belong in the initial scope. Where inventory variety is high, keeping selective rows alongside deep reserve storage often gives a better working layout. Next, the CAD plan shows storage locations, operating aisles, staging areas, and clearances. We review one-ended last-in, first-out storage or two-ended drive-through access against the inventory that moves along US-550 and I-25. The itemized quote separates equipment, accessories, labor, and agreed coordination work so your Bernalillo operations lead can see exactly what is included. Existing components are assessed for identification, damage, compatibility, and documented capacity rather than assumed suitable. Before installation or relocation, the scope establishes delivery access, exclusion zones, installation sequence, and the checks required at handover. Our team handles the permit side for you. The completed work is checked against the agreed drawing, with capacity documentation and operating limits provided for the configured system. Your team can then load and use the installation within those limits, with a clear record for future changes. High volume of a small number of SKUs Seasonal or buffer inventory held in bulk Cold storage and freezer rooms where cube matters most Product too fragile to floor-stack more than two high Buildings where floor space, not height, is the binding constraint Call (505) 436-7469: (505) 436-7469 ## Get a Drive-In Rack Quote for Your Bernalillo Warehouse Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (505) 436-7469. ### Albuquerque Pallet Rack 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 (505) 436-7469 Monday - Friday: 8:00 AM - 6:00 PM ## Design Questions for Drive-In Rack in Bernalillo - What forklift will enter the lanes, and what are its exact dimensions? - How many pallets do you hold per SKU? - Do you need LIFO, or does the product require drive-through FIFO? - What's the clear height and floor condition in the storage area? - How many total pallet positions are you trying to reach? ## Drive-In Rack Questions We Hear Most ### How are pallet rack load capacities determined? ### How much does pallet rack cost? ### Can you supply and install the pallet rack? ### What type of pallet rack do I need? ### How wide should my forklift aisles be? ## Other Rack Types We Supply in Bernalillo ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://albuquerquepalletrack.com/service-area/bernalillo ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://albuquerquepalletrack.com/service-area/bernalillo/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://albuquerquepalletrack.com/service-area/bernalillo/pallet-flow-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://albuquerquepalletrack.com/service-area/bernalillo/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://albuquerquepalletrack.com/service-area/bernalillo/carton-flow-rack ### Warehouse Relocation Move the storage system with a labeled teardown, destination layout, and phased reinstallation plan. View details https://albuquerquepalletrack.com/service-area/bernalillo/warehouse-relocation ## Nearby Areas We Also Serve Our delivery and installation territory covers the Albuquerque metro and greater New Mexico, so one team can handle multiple buildings for the same company. Drive-In Rack in Albuquerque: https://albuquerquepalletrack.com/service-area/albuquerque/drive-in-rack Drive-In Rack in Rio Rancho: https://albuquerquepalletrack.com/service-area/rio-rancho/drive-in-rack Drive-In Rack in Corrales: https://albuquerquepalletrack.com/service-area/corrales/drive-in-rack Drive-In Rack in Los Lunas: https://albuquerquepalletrack.com/service-area/los-lunas/drive-in-rack Drive-In Rack in Belen: https://albuquerquepalletrack.com/service-area/belen/drive-in-rack Drive-In Rack in Santa Fe: https://albuquerquepalletrack.com/service-area/santa-fe/drive-in-rack View All Service Areas: https://albuquerquepalletrack.com/service-area ## Where We Work Located in Albuquerque, we serve the entire metro and greater New Mexico with industrial pallet racks and warehouse storage solutions. ### Albuquerque Pallet Rack #### Address 2105 Vista Oeste NW Suite E #3491 Albuquerque, NM 87120 #### Phone (505) 436-7469 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Drive-In Rack in Bernalillo? Call (505) 436-7469 or request a quote and we will get a layout started. (505) 436-7469 Tap to Call: (505) 436-7469 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://albuquerquepalletrack.com/#business", "name": "Albuquerque Pallet Rack", "url": "https://albuquerquepalletrack.com", "telephone": "(505) 436-7469", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "2105 Vista Oeste NW, Suite E #3491", "addressLocality": "Albuquerque", "addressRegion": "NM", "postalCode": "87120", "addressCountry": "US" }, "hasMap": "https://www.google.com/maps?q=Albuquerque+Pallet+Rack,+2105+Vista+Oeste+NW,+Albuquerque,+NM+87120&output=embed", "areaServed": [ { "@type": "City", "name": "Albuquerque", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Rio Rancho", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Bernalillo", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Corrales", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Los Lunas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Belen", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Santa Fe", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Edgewood", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Moriarty", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Placitas", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Tijeras", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Grants", "containedInPlace": { "@type": "State", "name": "New Mexico" } }, { "@type": "City", "name": "Socorro", "containedInPlace": { "@type": "State", "name": "New Mexico" } } ] }, { "@type": "Service", "@id": "https://albuquerquepalletrack.com/service-area/bernalillo/drive-in-rack#service", "name": "Drive-In Rack in Bernalillo, NM", "serviceType": "Drive-In Rack", "url": "https://albuquerquepalletrack.com/service-area/bernalillo/drive-in-rack", "description": "No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.", "provider": { "@id": "https://albuquerquepalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Bernalillo", "containedInPlace": { "@type": "State", "name": "New Mexico" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://albuquerquepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://albuquerquepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Bernalillo", "item": "https://albuquerquepalletrack.com/service-area/bernalillo" }, { "@type": "ListItem", "position": 4, "name": "Drive-In Rack", "item": "https://albuquerquepalletrack.com/service-area/bernalillo/drive-in-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "How are pallet rack load capacities determined?", "acceptedAnswer": { "@type": "Answer", "text": "There is no single capacity for pallet rack: beam capacity is per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet, and the configured capacities go on load plaques." } }, { "@type": "Question", "name": "How much does pallet rack cost?", "acceptedAnswer": { "@type": "Answer", "text": "Price depends on pallet positions, height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and itemized quote. We supply new material only." } }, { "@type": "Question", "name": "Can you supply and install the pallet rack?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The rack is installed to the agreed layout, anchored to the floor and checked before loading." } }, { "@type": "Question", "name": "What type of pallet rack do I need?", "acceptedAnswer": { "@type": "Answer", "text": "Selective teardrop rack is the starting point for mixed SKUs; pushback stores two to six pallets deep with LIFO by SKU, pallet flow suits FIFO or dated stock, and drive-in suits bulk inventory with few SKUs. Cantilever handles long loads, while carton flow serves case picking. We compare the options against your inventory and handling equipment." } }, { "@type": "Question", "name": "How wide should my forklift aisles be?", "acceptedAnswer": { "@type": "Answer", "text": "Your lift truck sets the working aisle: counterbalance trucks generally need about 12–13 ft, reach trucks about 8–10 ft, and very-narrow-aisle trucks about 5–6 ft. Confirm the actual truck and load dimensions; aisle width drives storage density more than almost any other layout choice." } } ] } ] ```